Linear Borehole Televiewer

Linear Borehole Televiewer Traverse Type is a linear borehole in which the true joint orientations have been obtained from televiewer processing or other method (e.g., oriented core data which has already been processed into true Dip/DipDirection).

The Linear Borehole Televiewer Traverse type is exactly equivalent to the Linear Traverse type. You can use either one. It is included for consistency with the naming conventions of the new Curved Borehole Traverse types; and also to make a clear distinction between boreholes which use unprocessed oriented core data.

Traverses Tab

Traverse ID

For a Linear BH Televiewer Traverse, the default Traverse ID will have an "LBH-T" prefix (e.g., LBH-T1, LBH-T2, ...) when you initially add/create Traverses. After adding Traverses you can change the default ID values to any numeric or alpha-numeric values.

Data Format

The Data Format options for a Linear Borehole Televiewer Traverse are the same as for a Linear Traverse.

• Dip/DipDirection
• Strike(Right)/Dip
• Strike(Left)/Dip
• Trend/Plunge

See the Linear Traverse topic for details.

Traverse Format

The Traverse Format for a Linear Borehole Televiewer Traverse is always Trend / Plunge of the Linear borehole, regardless of the Data Format. See the Linear Traverse topic for details.

Example of Traverse Information dialog with one Linear BH Televiewer Traverse

Collar Data Tab

The Collar Data tab allows you to input the corresponding collar data for the borehole. See the Collar Data topic for more information.