Units

The Units used for a Dips model are determined by the selecting the unit convention under the General tab in the Project Settings dialog. You may select one of the following options:

• Metric
• Imperial

The Units option is only applicable when recording distance measurements along Linear or Borehole Traverses, and Distance is recorded in the Distance Column.

• If Units = Metric, then Distance measurements must be entered in meters.
• If Units = Imperial, then Distance measurements must be entered in feet.

The selected Units are applicable for the following options which require a Distance column:

• Joint Spacing
• RQD Analysis
• Joint Frequency
• Curved boreholes (collar / survey file)

The Units do not affect orientation data inpu