Plot Stage Data

The Plot Stage Data option in RocTunnel3 allows users to plot stage data against one or more selected stages.

The following stage data can be plotted for unit or combined blocks:

• Count All Blocks: Total count of all valid blocks per stage
• Count Removable Blocks: Total count of all removable blocks per stage
• Count Failed Blocks: Total count of all failed (FS < Design FS) blocks per stage
• Sum Weight Failed Blocks: Sum of all failed (FS < Design FS) block weights per stage
• Sum Volume Failed Blocks: Sum of all failed (FS < Design FS) block volumes per stage
• Min Factor of Safety All Blocks: Minimum block factor of safety of all blocks in one stage, per stage
• Max Weight All Blocks: Maximum block weight of all valid blocks in one stage, per stage
• Max Required Support Pressure All Blocks: Maximum block required support pressure of all valid blocks in one stage, per stage
• Max Failure Depth All Blocks: Maximum failure depth of all valid blocks in one stage, per stage

To create a Stage Plot:

1. Select Interpret > Plot Stage Data.
2. In the Plot Results by Stage dialog:
   1. Select the Block Type. The Block Type can be either Unit or Combined.
   2. Select the Data to Plot.
   3. Select one or more Stages by selecting the checkboxes.
      1. Click Select All to quickly select all stages in the project.
      2. Click Unselect All to quickly unselect all stages.
   4. Click OK to generate the stage plot.

The stage plot shows the Data to Plot vs. Stage Number.