Edit or Delete Measured Joints

Measured Joints in RocTunnel3 can be edited and deleted in a few different ways.

Editing Measured Joints

To edit the Measured Joint collection:

1. Select the Measured Joints node from the Visibility Tree.
2. In the Properties pane:
   1. Click the Edit button beside the Applied Property to bring up the Define Measured Joints dialog for editing.
   2. Change the Transparency of the measured joints using the slider, edit, or spin control. By default, Transparency = 0%.
      

OR:

1. Select Joints > Define Measured Joints to bring up the Define Measured Joints dialog for editing.

To edit a single selected Measured Joint:

1. Ensure that the Selection Mode is set to Entity Selection (View > Selection Mode > Entity Selection).
2. Click on a Measured Joint to select it from the 3D CAD View.
3. Right-click and select Edit Measured Joint to bring up the Define Measured Joints dialog for editing. The selected joint's corresponding row is highlighted.

To assign a Joint Property to selected Measured Joints:

1. Click on a Measured Joint to select it from the 3D CAD View.
2. Right-click and select Assign Joint Property to Selected Joints
3. In the Assign Joint Property dialog:
   1. Select the Joint Property.
   2. Click OK to assign the joint property to all selected measured joints.

Deleting Measured Joints

To delete the Measured Joint collection:

1. Select Measured Joints node from the Visibility Tree.
2. Click Delete button from the node entry in the Visibility Tree.

To delete selected Measured Joints:

1. Click on a Measured Joint to select it from the 3D CAD View.
2. Right-click and select Delete Selected Measured Joints to delete the selected joints.