Scale
The Scale option can be used to scale the size or change the shape of a boundary. For example, a circular excavation could be converted to an ellipse using the Scale option. The Scale option is primarily intended for Excavation boundaries, but can be used with any boundary type in RS2.
To use Scale:
- Select Scale
from the Edit sub-menu of the Boundaries menu. Scale Boundary is also available in the toolbar if you select the drop-list arrow beside the Move Boundary toolbar button. - Use the mouse to select the boundary(s) you would like to scale.
- When you are finished selecting, press Enter or right-click and select Done Selection.
- You will then be prompted to enter a base point for the scaling. Use the mouse or enter the x,y coordinates of the base point in the prompt line.
- You will then be prompted to enter the scaling in the x and y directions. Enter scale factors for both the x and y directions and press Enter, and all selected boundary(s) will be scaled about the base point. (Example: [ 1.5 , 1 ] would increase the x-axis dimensions by 50% and leave the y-axis dimensions the same).
Tips
- To scale an excavation about its center, enter the centroid of the excavation as the base point.
- To scale a boundary about any vertex, enter the vertex as the base point (this will leave the position of the vertex at the base point unchanged, and scale the location of all other vertices according to the (x,y) scale factors and the distance from the base point).
- An ellipse can be created from a circle by using the Scale option.