Export Data for RocSlope3
The Export Data for RocSlope3 option allows users to export SWedge model parameters to a special file format to be read into RocSlope3 to create the equivalent SWedge model.
The following SWedge data is exported:
- Slope geometry to create the RocSlope3 External
- Rock Unit Weight to set the RocSlope3 applied Material Property
- Joint geometry to create RocSlope3 Measured Joints or Joint Surfaces
- Joint 1
- Joint 2
- Basal Failure Plane (if applicable)
- Tension Crack (if applicable)
- Joint properties to create RocSlope3 Joint Properties
- Units
- Design Standards
To export data to RocSlope3:
- Select File > Export > Export Data for RocSlope3
- In the Save As dialog, set the file name and select Save to save the file. A single SWedgeToRocSlope3 file with the .swd2rocslope extension is saved.
To import an SWedgeToRocSlope3 file to RocSlope3, see the Import SWedge File topic.
LIMITATIONS:
- SWedge Probabilistic and Combinations analyses files are not supported by RocSlope3.
- SWedge Water, Seismic, and Forces input data are not exported.
- SWedge Bolts, Shotcrete, and Support Pressure are not exported.