RocSlope2 Maintenance+ Update History

Version 1.005 - April 2 2025 [Download]

1. CHANGED Added RSInsight link to Help tab
2. CHANGED Report Backbreak Distance in 2D Views and Result Details
3. CHANGED Report Bench Width in 2D Wedge and Planar views Coherent with the Slope Geometry
4. FIXED Miscellaneous Sensitivity Chart display fixes
5. FIXED Bad seismic load arrow rendering for Planar and Toppling Analysis
6. FIXED Water Contour Options are not working for Planar and Toppling Analysis
7. FIXED Issue after importing file and launching Report Generator
8. FIXED Issue with resetting views and block translations after translating a wedge or planar block from its original position
9. FIXED Planar and toppling analysis maximum bench width issue in bench design analysis
10. FIXED Issue with PF and PS values in Bench Design charts
11. FIXED Probabilistic analysis does not compute when joint orientation random variability defined with Fisher K
12. FIXED Generated slope bench width is shorter than user defined bench width when upper face slope has a non-zero dip
13. FIXED Block flexural toppling and external loading issue
14. FIXED Incorrect bolt import from RocTopple file
15. FIXED Probability of Failure erroneously shows '0' when SWedge Probabilistic Analysis is imported
16. FIXED Decimal & Percentage display incoherency between PoF and PoS in Statistical Plots
17. FIXED Issue with RocSlope2 adding additional row of Joint orientation data while Dips import
18. FIXED Issue with deleted spot bolt display after changing Bolt Force Application Type
19. FIXED Issue with stereonet background being black when printing
20. FIXED Issue with Block Flexure Toppling that are infinitely stable
21. FIXED Issue with Grouted Dowel forces not acting on blocks
22. FIXED Issue with phreatic surface display in 3D toppling view after it is deleted
23. FIXED RocSlope2 and RocTopple results are not matching for individual disjointed blocks
24. FIXED Issue with waviness angle when an SWedge Combinations Analysis file is imported
25. FIXED Issue with default bolt properties after RocTopple file import
26. FIXED Issue with bolt properties imported from RocTopple
27. FIXED Issue with point load locations when loads are imported from RocTopple
28. FIXED Point loads acting on toppling block's side surface don't affect FS in Toppling Analysis
29. FIXED Upslope toppling block failure mode discrepancy between RocSlope2 and RocTopple
30. FIXED Block flexural toppling analysis results are not matching with RocTopple
31. FIXED Point of Force Application values are not imported accurately from RocTopple file
32. FIXED Minimum FS values are erroneously shown as '-2' when No Blocks Formed in RocSlope2 analysis
33. FIXED Issue with Dip and Relative Min. and Relative Max. value ranges in Probabilistic Analysis
34. FIXED Exporting a user-defined design standard crashes the program
35. FIXED RocSlope2 and RocTopple individual block failure modes are not matching
36. FIXED Planar Block scaling generates blocks out of slope limits
37. FIXED Issue with planar block generation when true dip is used for orientation definition
38. FIXED Could not import Dips file when a joint set only includes one joint in Dips

Version 1.004 - November 22 2024 [Download]

1. FIXED Crash if Spot Bolt Property is changed when no valid blocks are formed in Toppling Analysis
2. FIXED Crash after .NET Framework Error due to bolts rendering
3. FIXED Issue with duplicating the saved data resulting a crash
4. FIXED Issue with Toppling block condition check

Version 1.003 - November 7 2024 [Download]

1. NEW Report Bench Width in Wedge Analysis Result Details
2. NEW Report Slope Face Area in Planar Analysis Result Details
3. FIXED Crash when Goodman and Bray is used
4. FIXED Program crashes when bolt force application is changed between passive and active
5. FIXED Stereonet grid lines not responding to projection method changes
6. FIXED Design Standards Have No Affect on Factor of Safety
7. FIXED Missing context sensitive help links
8. FIXED Import RocTopple Model with bolts Crashes the program
9. FIXED Add\Remove\Edit Bolt Pattern Leads to Microsoft.Net Framework exception error
10. FIXED "The unit is not displayed in the ""Wedge Sensitivity Analysis Input"" dialog"

Version 1.002 - September 25 2024 [Download]

1. FIXED Slope Geometry Coordinate Issue in Wedge View
2. FIXED Import User Define Seismic Load issue from SWedge
3. FIXED Search commands are disabled
4. FIXED Main window always launches in same place
5. FIXED Stereonet view is blank for when either Planar or Toppling mode only is on
6. FIXED Wrong Toppling Block Orientations

Version 1.001 - August 23 2024 [Download]

1. Commercial Release