Moving Barriers

To move a barrier:

1. Right-click on the barrier and select Edit > Move Barrier from the popup menu. You can also select Move Barrier from the Barrier menu.
2. If you used the Barrier menu option, select the barrier you want to move. (Note that if only one barrier exists in your model, that barrier will already be highlighted, and you only need to press Enter to select it.)
3. Select the new location for the barrier. Notice as you move the mouse that the barrier moves along the slope segments. When the barrier is placed it must not intersect any existing barriers or slope segments.

Notes:

• At any time, press ESC to cancel the operation, and the barrier will return to its original location.
• The height and angle of the barrier are not changed in this operation. Only the location of the barrier on the slope is changed.
• To change the location of the second barrier endpoint, see Editing Barrier Coordinates.

Related Topics

• Adding a Barrier
• Defining/Editing Barriers
• Copying Barriers
• Deleting Barriers
• Editing Barrier Coordinates
• Define Barrier Properties
• Barrier Design Library
• Barrier Sensitivity Analysis
• Barrier Report Input
• Barrier Report Output